Cartoon Network

30 April 2012

Re: [DIY] Must Have Tool:

 

I like the blade better on this Bosh than on the one I have as the mounting screw and collar extends on mine so that it is not totally flush with my work like the Bosh is.  However I'd have to compare the price of replacement blades as well as these can get a little pricey.  It does everything they have shown and more and the control is fantastic.  My cousin bought a Fien when they first came out and paid over $500 but since they are made in Germany he has a heck of a time finding replacement blades and they are quite expensive.  I originally bought mine to cut a doggy door into a  new $500.00 storm door and have become more impressed with its capabilities every day.  I've seen the tool and a complete blade assortment on sale for under 70.00.  Kind of like ink jet printers, they know you will be back for more blades because you can't help using the little devil.  I don't know anything about the cordless models but mine would probably be eating up batteries at a pretty good clip.

Dale in the Flat Lands:-----         Politics is supposed to be the second-oldest profession. I have come to realize that it bears a very close resemblance to the first.      ~Ronald Reagan        

snaffles@essex1.com wrote:

This video shows the versatility.
http://www.youtube.com/watch?v=_nvcypVO2ek&feature=related

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

RE: [DIY] Must Have Tool:

 


This video shows the versatility.
http://www.youtube.com/watch?v=_nvcypVO2ek&feature=related

------- Original Message -------
From : Dale S[mailto:dalu@hbcomm.net]
Sent : 4/29/2012 6:45:13 PM
To : DoIt_Yourself@yahoogroups.com
Cc :
Subject : RE: [DIY] Must Have Tool:

Every once in a while I come a cross a tool which
I wonder
how I ever did with out. The sonic saw is
just such a tool.
Rockwell (which I happened to buy) markets
theirs as the
Sonicrafter while Porter Cable also has a
good competition model
as well. I think if I had it to do over I'd
perhaps opt for the
Porter Cable as the blade change is quicker.
I have used mine
for everything from cutting into plaster for
electrical boxes to
cutting nails behind baseboard and trim.

I've recently been tying two roofs of unequal
pitch together and
it has been invaluable when working in tight
places and trimming
compound joints. The beauty of this little
saw is that it won't
cut the operator if you happen to come in
momentary contact with
the oscillating blade. The saw was originally
invented to cut
bone and remove casts with out damaging the
surrounding tissue.
Now that the patent has expired they have
become affordable and
available from any number of sources
including Harbor Freight.
Once you try one I'm sure it will become a
necessary part of
your tool case. The control in making or
dressing a cut is just
phenomenal.

--
Dale in the Flat Lands:-----

Politics is supposed to be the second-oldest
profession. I have come to realize that it bears a
very close resemblance to the first.
~Ronald Reagan

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

RE: [DIY] Must Have Tool:

 



Thanks for sharing. Looks like something that many of
us can us for a lot of different jobs.
http://www.youtube.com/watch?v=aXqJa-tJTgo
Joyce

------- Original Message -------
From : Dale S[mailto:dalu@hbcomm.net]
Sent : 4/29/2012 6:45:13 PM
To : DoIt_Yourself@yahoogroups.com
Cc :
Subject : RE: [DIY] Must Have Tool:

Every once in a while I come a cross a tool which
I wonder
how I ever did with out. The sonic saw is
just such a tool.
Rockwell (which I happened to buy) markets
theirs as the
Sonicrafter while Porter Cable also has a
good competition model
as well. I think if I had it to do over I'd
perhaps opt for the
Porter Cable as the blade change is quicker.
I have used mine
for everything from cutting into plaster for
electrical boxes to
cutting nails behind baseboard and trim.

I've recently been tying two roofs of unequal
pitch together and
it has been invaluable when working in tight
places and trimming
compound joints. The beauty of this little
saw is that it won't
cut the operator if you happen to come in
momentary contact with
the oscillating blade. The saw was originally
invented to cut
bone and remove casts with out damaging the
surrounding tissue.
Now that the patent has expired they have
become affordable and
available from any number of sources
including Harbor Freight.
Once you try one I'm sure it will become a
necessary part of
your tool case. The control in making or
dressing a cut is just
phenomenal.

--
Dale in the Flat Lands:-----

Politics is supposed to be the second-oldest
profession. I have come to realize that it bears a
very close resemblance to the first.
~Ronald Reagan

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

RE: [DIY] septic treatment system

 


Why are you putting grease down your drain?

------- Original Message -------
From : WayneT[mailto:landmagget@yahoo.com]
Sent : 4/29/2012 7:04:05 PM
To : DoIt_Yourself@yahoogroups.com
Cc :
Subject : RE: [DIY] septic treatment system

Does anyone know if there a grease dissolver
that I can add to my septic treatment system to keep
grease from building up. I try to keep grease out of
the treatment plant but some how it keeps building
up. I have a filter installed on the septic side
before it gets to the water ditributor side to my
sprinklers but grease still gets through.

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

Re: [DIY] Radial Arm Saw Parts.

 

found one about 150 miles from here and it is identical to the 40+ year old Craftsman I have.  Looks like brand new as it was given to this individual by his father-in-law and had hardly been used.  Now comes the rub, which one will I want to adapt to a radial router.  I think the wife are going to take a little day trip and try to go up and have a look at it this coming week.

Dale in the Flat Lands:-----         Politics is supposed to be the second-oldest profession. I have come to realize that it bears a very close resemblance to the first.      ~Ronald Reagan        

Steve Wilson wrote:
You're welcome. One of the few times I've been able to use it for someone else.

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

Re: [DIY] Radial Arm Saw Parts.

 

You're welcome. One of the few times I've been able to use it for someone else.

On 4/29/2012 4:53 PM, Dale S wrote:

 

Thanks:
I'm chasing a couple of them now.

Dale in the Flat Lands:-----         Politics is supposed to be the second-oldest profession. I have come to realize that it bears a very close resemblance to the first.      ~Ronald Reagan        

Steve Wilson wrote:
 

I wrote a javascript/html program that searches all of a state for anything you're looking for on Craigslist. I looked around Kansas and found these. Most are working except one.
http://kansascity.craigslist.org/tls/2962425410.html
http://topeka.craigslist.org/tls/2883058349.html
http://topeka.craigslist.org/tls/2928852877.html
http://topeka.craigslist.org/tls/2912570592.html
Steve

On 4/29/2012 4:09 PM, Dale S wrote:

 

Does anyone out there in DIY land have a radial arm unit with a burned out motor?  I'm wanting to build an adapter for a router to use on a radial arm.

--   Dale in the Flat Lands:-----         Politics is supposed to be the second-oldest profession. I have come to realize that it bears a very close resemblance to the first.      ~Ronald Reagan        

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

Re: [DIY] repair of old style masonite lap siding

 

Howdy Friends,
 
In reguards in Hardi plank siding it's true in the first few years of it's being used it proved very poor.  However, now the newer redeigned manufacturing it's very well built.  I just completed my mom's house which is a complete duplex of the same floor plan with it.  This was from the Hardi Plank company.  I called the company after locating them from the web and ask for both samples and all styles from them.  They gladly provided any and all the support they could and some that wasn't even thought about.
 
Just about any color design and finished style can be done.  This is just one of the companies that manufacture this cement based product.  For any other and any questions you have in reguard to this product just get on the web and type in "hardiboard" and you will come up with several companies.
 
AGAPE,
jdb, txredneck
********************************************************************************************
********************************************************************************************

From: zinkz5 <stainkampjohn@gmail.com>
To: DoIt_Yourself@yahoogroups.com
Sent: Sunday, April 29, 2012 3:04 PM
Subject: [DIY] repair of old style masonite lap siding
 
Hello again,
The siding on my house and garage is the old style 12" lap siding, made of Masonite. Fifty plus years old.
The siding on my garage is being completely replaced, probably with hardie-board cement fiber stuff. My house has the same type of siding though. What do I do about repairing(replacing)siding on my house? I don't want to reside my entire house.
Apparently this stuff has been outlawed because of the poor quality of the product manufactured in the '90's. What are my choices for repair materials? I saw one fellow use the wood grain cement fiberboard, and turn the wood grain to the inside, which still left a sort of burlap finish on the outside. Does anyone make the cement stuff with a smooth finish? Can I use Masonite panels cut to size? Salvaged material maybe?
Does any one make this stuff anymore?
Thanks,
John S.
Greensboro, NC

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

Re: [DIY] wall studs

 

Howdy Friends,
 
Yes you can repair the studs there.  With each individual stud cut it off at about the 12" for 8' studs new or 16" for 12' studs, either was you will still have the 2 needed  cripple studs for each single stud which will be needed.  Either was you buy your studs in 8'ers or 16'ers do get the pressurer treated for protectoin from water.  THIS only NEEDE TO BE DONE if you have dont have a pressurer treated footer at the seal plate area.
 
AGAPE,
jdb, txredneck
********************************************************************************************
********************************************************************************************

From: zinkz5 <stainkampjohn@gmail.com>
To: DoIt_Yourself@yahoogroups.com
Sent: Sunday, April 29, 2012 2:42 PM
Subject: [DIY] wall studs
 
Hello,
I have a garage in bad shape. The siding is shot, the sill plate is bad in some areas, and some of the wall studs are bad on the bottom few inches. I can reside it, and I think I can support the rafters, with a beam & jacks, to take the weight off the wall in order to replace the sill plate (just a 2x4 was used). My question is: What is the acceptable way to repair the wall studs which are bad? Do I have to replace the whole stud?, or can I scab in new sections (about 12" long) at the bottoms? Is just nailing them in OK, or would screws be better? Do I need some kind of "connector" plates to graft on a new one foot section at the bottom of the stud, rather than going along side of it with a new piece?
Any advice?
Thanks,
John S.
Greensboro, NC

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

Re: [DIY] septic treatment system

 

The only sure cure is a grease trap before the septic tank, but this too will occasionally need to be cleaned out, however it is usually a simple matter of removing the top and skimming the grease off the top of the fluid.  Do this on a real cold day and the grease will solidify after the top has been off for a while and then it will come put in chunks.

Dale in the Flat Lands:-----         Politics is supposed to be the second-oldest profession. I have come to realize that it bears a very close resemblance to the first.      ~Ronald Reagan        

WayneT wrote:
 

Does anyone know if there a grease dissolver that I can add to my septic treatment system to keep grease from building up. I try to keep grease out of the treatment plant but some how it keeps building up. I have a filter installed on the septic side before it gets to the water ditributor side to my sprinklers but grease still gets through.

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

[DIY] septic treatment system

 

Does anyone know if there a grease dissolver that I can add to my septic treatment system to keep grease from building up. I try to keep grease out of the treatment plant but some how it keeps building up. I have a filter installed on the septic side before it gets to the water ditributor side to my sprinklers but grease still gets through.

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

Re: [DIY] Radial Arm Saw Parts.

 

Thanks:
I'm chasing a couple of them now.

Dale in the Flat Lands:-----         Politics is supposed to be the second-oldest profession. I have come to realize that it bears a very close resemblance to the first.      ~Ronald Reagan        

Steve Wilson wrote:
 

I wrote a javascript/html program that searches all of a state for anything you're looking for on Craigslist. I looked around Kansas and found these. Most are working except one.
http://kansascity.craigslist.org/tls/2962425410.html
http://topeka.craigslist.org/tls/2883058349.html
http://topeka.craigslist.org/tls/2928852877.html
http://topeka.craigslist.org/tls/2912570592.html
Steve

On 4/29/2012 4:09 PM, Dale S wrote:

 

Does anyone out there in DIY land have a radial arm unit with a burned out motor?  I'm wanting to build an adapter for a router to use on a radial arm.

--   Dale in the Flat Lands:-----         Politics is supposed to be the second-oldest profession. I have come to realize that it bears a very close resemblance to the first.      ~Ronald Reagan        

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

[DIY] Must Have Tool:

 

Every once in a while I come a cross a tool which I wonder how I ever did with out.  The sonic saw is just such a tool.  Rockwell (which I happened to buy) markets theirs as the Sonicrafter while Porter Cable also has a good competition model as well.  I think if I had it to do over I'd perhaps opt for the Porter Cable as the blade change is quicker.  I have used mine for everything from cutting into plaster for electrical boxes to cutting nails behind baseboard and trim.

I've recently been tying two roofs of unequal pitch together and it has been invaluable when working in tight places and trimming compound joints.  The beauty of this little saw is that it won't cut the operator if you happen to come in momentary contact with the oscillating blade. The saw was originally invented to cut bone and remove casts with out damaging the surrounding tissue.  Now that the patent has expired they have become affordable and available from any number of sources including Harbor Freight.  Once you try one I'm sure it will become a necessary part of your tool case.  The control in making or dressing a cut is just phenomenal.

--   Dale in the Flat Lands:-----         Politics is supposed to be the second-oldest profession. I have come to realize that it bears a very close resemblance to the first.      ~Ronald Reagan        

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

Re: [DIY] Radial Arm Saw Parts.

 

I wrote a javascript/html program that searches all of a state for anything you're looking for on Craigslist. I looked around Kansas and found these. Most are working except one.
http://kansascity.craigslist.org/tls/2962425410.html
http://topeka.craigslist.org/tls/2883058349.html
http://topeka.craigslist.org/tls/2928852877.html
http://topeka.craigslist.org/tls/2912570592.html
Steve

On 4/29/2012 4:09 PM, Dale S wrote:

 

Does anyone out there in DIY land have a radial arm unit with a burned out motor?  I'm wanting to build an adapter for a router to use on a radial arm.

--   Dale in the Flat Lands:-----         Politics is supposed to be the second-oldest profession. I have come to realize that it bears a very close resemblance to the first.      ~Ronald Reagan        

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___

[DIY] Re: Automotive air filters

 

I owe everyone who responded a big thank you. You saved my butt again, not to mention, my wallet. For anyone asking, the filter was right behind the glove box. Both the glove box door and the glove box itself fold down toward the floor and the filter is right there, very easy to change. And a big finger to the dealership that tried to charge me $1$105 to do this .

--- In DoIt_Yourself@yahoogroups.com, "resawd2012" <resawd2012@...> wrote:
>
> Got an oil change the other day at a dealership. The service manager informed me that my engine air cleaner and my cabin air filter needed to be changed. To the tune of $105 which I politely refused. Well, maybe what I told him he could do with his $105 charge wasn't to polite. I figured that even at 78 and with a cane I could change a couple $15 to $20 myself. The engine air cleaner was easy, it just sat there in plain sight when I popped the hood. But does anyone know where in the world is the cabin air filter on a 2008 Honda Civic? I looked all over under the hood and under the dash but could see nothing that looked like a filter.
>

__._,_.___
Recent Activity:
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.

__,_._,___