Cartoon Network

28 February 2015

Re: [DIY] Re: Hot Galvanized

 

It is.


KrazyKyngeKorny (Krazy, not stupid)



On Fri, Feb 27, 2015 at 1:08 PM, pumps2fix@yahoo.com [DoIt_Yourself] <DoIt_Yourself@yahoogroups.com> wrote:
 

Appears to be just another method of "rustproofing" a metal product....Pumps


__._,_.___

Posted by: Ray Kornele <krazykyngekorny@gmail.com>
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (4)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

[DIY] viking range heat baffle repair

 


Has anyone tackled a heat baffle repair in the bottom of a viking
range (or other ranges with heat baffle between gas burner
and bottom of the oven)?

There seems to be the sheet metal oven bottom, then
a metal plate that screws to that, with a gap
between.
A small, damaged piece of insulation was there,
that had been trapped between the two pieces
of sheet metal.

I'm trying to find/fabricate the replacement insulation.
I have kaowool (refractory material), but not sure
if that will work, as well if the entire space between should
be insulated or just part.

Viking service from the company is notoriously
difficult to deal with. A new complete unit of the bottom
plate, insulation and baffle plate runs $300-$500.


Including a link to just the heat baffle, in case that helps.

Thanks
Dave

http://www.allvikingparts.com/A2001623_Oven_Bottom_Heat_Shield_p/a2001623.htm


__._,_.___

Posted by: daveu@sptddog.com
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (1)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

[DIY] Re: Hot Galvanized

 

Appears to be just another method of "rustproofing" a metal product....Pumps

__._,_.___

Posted by: pumps2fix@yahoo.com
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (3)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

27 February 2015

Re: [DIY] Hot Galvanized

 

Staples with the cooper color are electroplated with copper. Zinc coating on steel is called galvanized. They can be hot dipped, electroplated or painted. I have applied cold galvanizing paint. 24 pounds per gallon and quite expensive.


KrazyKyngeKorny (Krazy, not stupid)



On Thu, Feb 26, 2015 at 11:24 AM, subprong subprong@gmail.com [DoIt_Yourself] <DoIt_Yourself@yahoogroups.com> wrote:
 

I purchased a box of staples recently for a pneumatic stapler.  I noticed that the staples were silver in color. In the past, these same staples always had a copperish tone to it. 

The description states "Hot Galvanized Finish".  Not to be confused with "hot dipped", by the way.

Could it be that the previous lot of staples were electroplated instead of hot galvanized?

Just wanting to make sure that these are actually indeed galvanized. And not that this batch didn't make it thru the process, hence it not having that copper hue to it.


__._,_.___

Posted by: Ray Kornele <krazykyngekorny@gmail.com>
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (2)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

[DIY] Hot Galvanized

 

I purchased a box of staples recently for a pneumatic stapler.  I noticed that the staples were silver in color. In the past, these same staples always had a copperish tone to it. 

The description states "Hot Galvanized Finish".  Not to be confused with "hot dipped", by the way.

Could it be that the previous lot of staples were electroplated instead of hot galvanized?

Just wanting to make sure that these are actually indeed galvanized. And not that this batch didn't make it thru the process, hence it not having that copper hue to it.

__._,_.___

Posted by: subprong <subprong@gmail.com>
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (1)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

18 February 2015

[DIY] Re: sump pump not turning off

 

So, if it is broken, and you do NOT fix it when you try, have you done any harm?  In  most cases, "NO, because you learned something" (there are exception for the really stupid, and their videos and pictures are available on the internet and the morgue.
 
 
Terry/ Memphis

__._,_.___

Posted by: THenne1713@aol.com
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (7)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

17 February 2015

Re: [DIY] sump pump not turning off

 

The float rises to the same level, however the depth of water in the sump is higher as it requires more water to raise the heaver float.

I only placed the washer on the float, no adhesive used. If washer falls off pump reverts to old cycle.

chucknjeanV

seaavee@yahoo.com

Photographs at:

http://s1081.photobucket.com/profile/seaavee

There is only one basic human right, the right to do as you damn well please. And with it comes the only basic human duty, the duty to take the consequences. P. J. O'Rouke

--------------------------------------------
On Mon, 2/16/15, Ray Kornele krazykyngekorny@gmail.com [DoIt_Yourself] <DoIt_Yourself@yahoogroups.com> wrote:

Subject: Re: [DIY] sump pump not turning off
To: DoIt_Yourself@yahoogroups.com
Date: Monday, February 16, 2015, 10:09 AM






























So long as the
float can still rise. This would lower the levels at which
the pump starts and stops. No problem.


KrazyKyngeKorny
(Krazy, not stupid)



On Mon, Feb 16, 2015
at 4:23 AM, seaavee@yahoo.com
[DoIt_Yourself] <DoIt_Yourself@yahoogroups.com>
wrote:















 






Can I add a weight to the float to make it
"bottom" and turn off the
pump?Thanks for your
input.















 

































__._,_.___

Posted by: Chuck Vischulis <seaavee@yahoo.com>
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (6)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

Re: [DIY] sump pump not turning off

 

So long as the float can still rise. This would lower the levels at which the pump starts and stops. No problem.


KrazyKyngeKorny (Krazy, not stupid)



On Mon, Feb 16, 2015 at 4:23 AM, seaavee@yahoo.com [DoIt_Yourself] <DoIt_Yourself@yahoogroups.com> wrote:
 
Can I add a weight to the float to make it "bottom" and turn off the pump?

Thanks for your input.


 












__._,_.___

Posted by: Ray Kornele <krazykyngekorny@gmail.com>
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (5)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

16 February 2015

RE: [DIY] sump pump not turning off

 

Modified and installed a washer, placed it on float. Cycles fine.

Thanx,

chucknjeanV

seaavee@yahoo.com

Photographs at:

http://s1081.photobucket.com/profile/seaavee

There is only one basic human right, the right to do as you damn well please. And with it comes the only basic human duty, the duty to take the consequences. P. J. O'Rouke

--------------------------------------------
On Mon, 2/16/15, Ron Johnson l0c0l0b0@hotmail.com [DoIt_Yourself] <DoIt_Yourself@yahoogroups.com> wrote:

Subject: RE: [DIY] sump pump not turning off
To: "YahooGroup DIY" <doit_yourself@yahoogroups.com>
Date: Monday, February 16, 2015, 7:33 AM


























I have no experience with this but, like the
old needle skipping on a record problem,  I would try
adding a little bit of weight, but not too much.

To:
DoIt_Yourself@yahoogroups.com
From: DoIt_Yourself@yahoogroups.com
Date: Mon, 16 Feb 2015 04:23:46 -0800
Subject: [DIY] sump pump not turning off
















 










I have installed a new (electric) sump and a water
powered backup sum pump. The electric pump does not shut off
when the sump is empty. Very light pressure on the float
shuts the pump off. Can I add a weight to the float to make
it "bottom" and turn off the pump?


Thanks for your input.

































__._,_.___

Posted by: Chuck Vischulis <seaavee@yahoo.com>
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (4)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

Re: [DIY] sump pump not turning off

Needle skipping on a record? Some one is showing their age with that
one. :-)

Flat_Land Dale
Ron Johnson l0c0l0b0@hotmail.com [DoIt_Yourself] wrote:
> I have no experience with this but, like the old needle skipping on a
> record problem, I would try adding a little bit of weight, but not
> too much.


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com




------------------------------------

------------------------------------

Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/DoIt_Yourself/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/DoIt_Yourself/join
(Yahoo! ID required)

<*> To change settings via email:
DoIt_Yourself-digest@yahoogroups.com
DoIt_Yourself-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
DoIt_Yourself-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/

RE: [DIY] sump pump not turning off

 

I have no experience with this but, like the old needle skipping on a record problem,  I would try adding a little bit of weight, but not too much.


To: DoIt_Yourself@yahoogroups.com
From: DoIt_Yourself@yahoogroups.com
Date: Mon, 16 Feb 2015 04:23:46 -0800
Subject: [DIY] sump pump not turning off

 

I have installed a new (electric) sump and a water powered backup sum pump. The electric pump does not shut off when the sump is empty. Very light pressure on the float shuts the pump off. Can I add a weight to the float to make it "bottom" and turn off the pump?


Thanks for your input.

__._,_.___

Posted by: Ron Johnson <l0c0l0b0@hotmail.com>
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (2)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

[DIY] sump pump not turning off

 

I have installed a new (electric) sump and a water powered backup sum pump. The electric pump does not shut off when the sump is empty. Very light pressure on the float shuts the pump off. Can I add a weight to the float to make it "bottom" and turn off the pump?


Thanks for your input.

__._,_.___

Posted by: seaavee@yahoo.com
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (1)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

15 February 2015

Unexpected sign-in attempt

Yahoo
Hi mr,
On Tue, Nov 25, 2014 7:50 AM PST, we noticed an attempt to sign in to your Yahoo account narrongs from United States via an app.
If this was you, please sign in to Yahoo from your mobile web browser before signing in to the app again. Or, you can access the app and increase the security of your account by enabling Second Sign-In Verification and creating an app-specific password.
If you haven't recently signed in from United States and believe someone may have accessed your account, please visit this link to change your password and update your account recovery information.
Thanks for taking these additional steps to keep your account safe.
Yahoo
Replies sent to this email cannot be answered.

14 February 2015

[DIY] Re: Caulk/ age/ (adhesive)

 

I  would not expect too much from a product warranty.....The most you will get is
product replacement.....There are too many factors involved in your assembly,
adhesion process to warrant any financial compensation......Pumps

__._,_.___

Posted by: pumps2fix@yahoo.com
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (4)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___

[DIY] Re: Caulk/ age/ (adhesive)

 

Yes, i would apply for warranty  and seek their recommendation for your use.



Terry
thenne1713@aol.com

__._,_.___

Posted by: Terry <thenne1713@aol.com>
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (3)
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com

.

__,_._,___