Yes, I did mean lower wattage. Thanks for explaining how long these bulbs last. I guess I do need a "ruggedized" Bulb. I will look for one. I did put a regular spiral shaped fluorescent bulb in my work light and that even goes out and then will come back on. It works in any other fixture. I think it is 27 W. Maybe I have a bad socket too. Is there a way to revive the socket?
Thanks,
GB
--- In DoIt_Yourself@yahoogroups.com, OOWONBS@... wrote:
>
> >Bill
> Do the lower voltage bulbs last longer and break less easy?
> ThanksGB
>
> You were answered correctly.
> And SOMEtimes you can get a 130V bulb.
> These will not be as light efficient, as a 120V bulb.
> Actually, some photographers use 120V bulbs at 130V
> (they need a small step-up transformer.) They get a
> brighter, whiter light... that lasts not the usual 1-2000
> hours, but a mere 10.
>
> BUT -
> MeThinks that you meant to ask, "Lower Wattage" bulbs.
>
> To which I will answer, Yes, but ever so slightly that
> it is unnoticeable. If you put a 150W bulb where a
> 250 is allowed, it will run a tad cooler, and last a
> tad longer. But don't count on a lot of difference.
> I love the cooler housing. A person does come
> into contact with these now and then. They get HOT.
>
> Main thing with these is total cleanliness when inserting
> a new bulb. Not just clean fingers - Use a tissue.
> Dirt, finger oils, are death to these.
>
> The bulbs are sorta high-pressure, so safety glasses
> when removing & installing is good. If you drop 1,
> (while I am adept at putting a foot under, LOL,)
> avert your face and close your eyes.
>
> For plain mechanic's lamps, there is a "ruggedized"
> incandescent bulb. Wonder if they will make these,
> when the law disallowing manufacture goes into
> effect, in a year or two...
>
> BTW -
> I don't mod here, and a lotta guys know more than I,
> or remember something I didn't, so toss your questions
> to the wind and someone will grab them & you'll get dif
> points of view, also... LOL!
>
> BillSF9c
>
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (11) |
No comments:
Post a Comment