Thanks, Jeffrey;
I was even thinking that we could keep the same nails in (if they're not bent upon taking them out), push them up and out from the backside using a ceramic tile slate or such, and them just hammer them back in. We can use a little nail tap to get them in place without leaving hammer marks on the molding, and then one quick coat of the same almond color paint. We'll see, thanks for the advice :u)
--- In DoIt_Yourself@yahoogroups.com, JEFFREY WILLIAMS <livhosaere62@...> wrote:
>
> bill is certainly right It just make the job look some much better.One note carefully
>
>  remove the baseboard mouldings label them on the back as to what walls each is off and always pull the nails out through the back of the moldings some you will only have small holes to fill on the face side with color putty to top the job off, hope this helps jeff
>
>
No comments:
Post a Comment