Thanks. I'm going to take a picture of the hole and attach it to my post asap. It's really larger than 4x3" I was thinking. I thought I could take care of it myself by removing the bell system that was broken, which came with the door when I guess these units (condos) were built 35 years ago. I do have a bell that is run by remote on the side of the door to replace the bell I removed, but still I have a gaping hole in the front door (I covered it with tape on the inside so nobody can see through the hole from the outside), and would like to put a bell and viewer in its place, if possible. I realize a buyer would want a peephole, I don't blame him. But exactly how am I going to do this? Cindi
From: billsf9c <OOWONBS@Netscape.net>
To: DoIt_Yourself@yahoogroups.com
Sent: Wednesday, October 31, 2012 3:39 PM
Subject: [DIY] Re: Suggestions needed for glue
From: billsf9c <OOWONBS@Netscape.net>
To: DoIt_Yourself@yahoogroups.com
Sent: Wednesday, October 31, 2012 3:39 PM
Subject: [DIY] Re: Suggestions needed for glue
4x3 I read, somewhere?
2 part solution...
A small picture frame that fits, makes it look cute on both sides, (optional plastic wall-locker mirror,) and any of MANY choices to glue the hole shut. Then, add a good peeper.
THEN, there's a 2 part, no wire doorbekll. Uses batteries.
Outside looks normal. Inside, radio frequency, mount anywhere.
Neat thing, select from mebe 40 tunes. One customer selected
the "dog-bark..." LOL!
BillSF9c
--- In DoIt_Yourself@yahoogroups.com, Cindi Wass <cleanboost2@...> wrote:
>
> I have a metal front door and the bell and peephole system broke and I removed it. Now I am left with a gaping hole there but I am having problems finding a replacement that fits. The company no longer makes that particular device. Also, even if I were to cover the hole with another device, I would have to work with wires and electricity and I don't know how to do that. Therefore, I probably want to put either tile over it or metal, but I need a good glue adherent that will make the tile or metal stick. Suggestions for the type of glue I need would be appreciated.f
>
2 part solution...
A small picture frame that fits, makes it look cute on both sides, (optional plastic wall-locker mirror,) and any of MANY choices to glue the hole shut. Then, add a good peeper.
THEN, there's a 2 part, no wire doorbekll. Uses batteries.
Outside looks normal. Inside, radio frequency, mount anywhere.
Neat thing, select from mebe 40 tunes. One customer selected
the "dog-bark..." LOL!
BillSF9c
--- In DoIt_Yourself@yahoogroups.com, Cindi Wass <cleanboost2@...> wrote:
>
> I have a metal front door and the bell and peephole system broke and I removed it. Now I am left with a gaping hole there but I am having problems finding a replacement that fits. The company no longer makes that particular device. Also, even if I were to cover the hole with another device, I would have to work with wires and electricity and I don't know how to do that. Therefore, I probably want to put either tile over it or metal, but I need a good glue adherent that will make the tile or metal stick. Suggestions for the type of glue I need would be appreciated.f
>
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (28) |
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
.
__,_._,___
No comments:
Post a Comment