We have a 7 year old ge profile dishwasher with controls hidden on top. There is standing water in the bottom. Water from all parts of the cycle, doesn't fully drain. Here's what we have done
No disposal is connected properly with high hose
Checked and removed all hoses, drain baskets, ect. To check for clogs or debri
Replaced drain pump with the selonoid part
Ran cycles with normal and just rinse resulting in same problem.
Float looks ok but are checking as we speak with multimeter
Disconnected from sink, sink is fine.
We ran the dishwasher into bucket. Water does come out but slow, a little more than trickle. It seems to run long enough (making me think timer issues are fine) but the actual water isn't flowing fast enough.
Is the drain hose supposed to be pumping out the water at a decent flow, similar to maybe washing your hands? Or is it supposed to drain a little bit since it's being pushed so far by the pump? If it's supposed to drain faster at a higher volume, what could be slowing it? Thanks for any help.
Posted by: amiemarie7@hotmail.com
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (1) |
No comments:
Post a Comment