I tried tightening the plastic nut but there is still water dripping down.
--- In DoIt_Yourself@yahoogroups.com, subprong <subprong@...> wrote:
>
> I think there is a nut that tightens that incoming water tubing to the
> underside of the toilet tank. You may want to try tightening that first.
> Or perhaps there is a crack in either that nut or the tubing itself.
>
> I believe you'd need to shut off that water valve and then flush the toilet
> to get all of the water out of the back tank before replacing anything.
>
> I think the overflow pvc tube is actually located in the "middle" of the
> tank where as that incoming water line is located on the end (usually left
> side) of the tank.
>
> On Mon, Oct 24, 2011 at 8:22 AM, brian <chanbr@...> wrote:
>
> > **
> >
> >
> > Water is dripping from the bottom of the tank where there is a tubing that
> > goes to the shutoff valve. What should I replace? The overflow tube? Thanks
> > in advance.
> >
> > Brian
> >
> >
> >
>
No comments:
Post a Comment