- and it's just 14-2 with ground - black, white, and bare ground - that's supplying everything.
--- In DoIt_Yourself@yahoogroups.com, "jmr1290" <jomarex@...> wrote:
>
> The PO added a garage door opener (supposed to be grounded) by plugging it into an un-grounded adapter screwed into the original simple ceramic fixture for a regular bulb.
>
> I do want the g. d. opener to be switched, so I can leave the door cracked open at the bottom, and not have somebody come up and push the outside button and open the garage door all the way.
>
> I was going to put a grounded switch to a grounded outlet in the ceiling, to plug the g-d-opener into. And add a switch just for plain lights for the garage ceiling.
>
> --- In DoIt_Yourself@yahoogroups.com, "wired" <wiredformen@> wrote:
> >
> > It sounds like you are using the original light switch for power to the opener (added after the house was built). You may have a red, black, and white wire cable from the switch to the opener, then a black and white wire cable from the opener to the other plugs. If so, put the opener on the black and white wires and then add a light to the red and white wires. The opener needs to be hot at all times.
> > If this scenario isn't your situation, inform us of what color wires are in each box.
> >
> > --- In DoIt_Yourself@yahoogroups.com, Joy Rex <jomarex@> wrote:
> > >
> > > The two books I'm looking at don't seem to cover this exact situation.
> > >
> > > I have a switch going to the garage door opener, and then the power
> > > continues on to some always-hot outlets in other rooms. Is there any
> > > reason I couldn't add another switch just for lights in the garage?
> > > Just add another set of black pigtails for the other switch and add
> > > the white wire to the rest of them? That's a lot of wires, but I got
> > > a big double box.
> > >
> > > I hope that makes sense...
> > >
> > > thanks
> > > Joy
> > >
> >
>
No comments:
Post a Comment