ok, that's interesting. I'm learning.
From: wired <wiredformen@yahoo.com>
To: DoIt_Yourself@yahoogroups.com
Sent: Friday, November 18, 2011 8:42 AM
Subject: Re: [DIY] Plastic ceiling panels
To: DoIt_Yourself@yahoogroups.com
Sent: Friday, November 18, 2011 8:42 AM
Subject: Re: [DIY] Plastic ceiling panels
In explanation of what the other responder meant by "that's remodeling" is that in remodeling, nothing seems to be easy.
What would be easy never fits and everything leads to another.
When figuring costs, you can expect it to cost double your best guess.
--- In DoIt_Yourself@yahoogroups.com, Cindi Waters <clean_boost@...> wrote:
>
> while I think your response is probably amusing, kindly explain what you mean. :-) WHAT DO YOU MEAN THAT IT IS REMODELING? Decent plastic is remodeling? hehehe. Anyway, I found a guy on craigslist who swears he knows what he's doing, he used to work for the complex I live at, and thanked me for the opportunity. He's willing to do the job for $60 ... I'm happy about that, and hopefully i can MOVE ON from that point! I won't count the chickens until they're hatched, I'll let you know if he fulfills his promise to do a perfect job!
>
>
>
> ________________________________
> From: JEFFREY WILLIAMS <livhosaere62@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 10:41 PM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> that's remodeling; you can't have it all.lol
>
>
>
> ________________________________
> From: Cindi Waters <clean_boost@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 12:58 PM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> Yeah. I only wish there was plastic that was soft enough to be easily cut yet stay in place as well. sigh.
>
>
>
> ________________________________
> From: JEFFREY WILLIAMS <livhosaere62@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 12:30 PM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> I believe you can do it to and yes use poster board or those file folders,beer boxes what ever that is stiff enough for you to keep it in place to mark.
>
>
>
> ________________________________
> From: Cindi Waters <clean_boost@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 12:09 PM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> I was thinking to get posterboard for the curves so I could easily bend it. The cardboard is good for the rectangular pieces, yes, you are right. This morning i came to a stalemate with myself and realized I could not go on. So I called someone who said he could do it for $50-100. i thought it was a fair price, but I do believe I can do more of it myself -- now that I have the right cutting tool and the idea of how to do it. The big problem will come in with the curved part, so I think I'll go out and buy some posterboard material, or I even have file folders that might work also to get a template of the curved parts.
>
>
>
> ________________________________
> From: JEFFREY WILLIAMS <livhosaere62@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 11:42 AM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> if you have to you could make cardboard templates of each curve then transfer to the plastic panels then the curves will be right the first time
>
>
>
> ________________________________
> From: Cindi Waters <clean_boost@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 7:59 AM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> the utility knife didn't do the job. The lady at HD told me how to do it, with a special cutter ($4) and HD40, also put masking tape on each side of the cut to make sure I have a straight line. So far, it worked, now all I have to do is the curve part.
>
>
>
> ________________________________
> From: Mike Shoaf <mike.shoaf@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 6:33 AM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> how where you cutting the panels? I have seen it done with a $10,000 table saw designed to do just that, but you probably don't have one of those either-lol. you can cut the straight ones using a straight edge and scoring with a razor knife, then breaking at the score line. for the angle cuts, have you tried a rotary cutter such as a dremel?
>
>
> ________________________________
> From: clean_boost <clean_boost@...>
> To: DoIt_Yourself@yahoogroups.com
> Sent: Wednesday, November 16, 2011 11:29 PM
> Subject: [DIY] Plastic ceiling panels
>
>
> Â
> I have old, horrible plastic ceiling panels in the kitchen. They are breaking and so I took them down. I should not have taken them all down, but I did. I erroneously thought they would be easy to replace. I was wrong. I bought the plastic sheeting they make for these things and tried to cut them. They are very hard to cut. they split and break when I cut them. Plus it is very hard to make the right curves on them to fit the panels on the ceiling, not all the panels are angular. Some of the panels have curves, which makes it harder than ever to size and cut. Meantime, I am wondering if there is something else besides this junk sheeting that I can use, short of simply ripping the entire fluorescent light units down off the ceiling which will cost me a fortune to do and then replace the ceiling? This is A W F U L!!! HELP. Please.
>
What would be easy never fits and everything leads to another.
When figuring costs, you can expect it to cost double your best guess.
--- In DoIt_Yourself@yahoogroups.com, Cindi Waters <clean_boost@...> wrote:
>
> while I think your response is probably amusing, kindly explain what you mean. :-) WHAT DO YOU MEAN THAT IT IS REMODELING? Decent plastic is remodeling? hehehe. Anyway, I found a guy on craigslist who swears he knows what he's doing, he used to work for the complex I live at, and thanked me for the opportunity. He's willing to do the job for $60 ... I'm happy about that, and hopefully i can MOVE ON from that point! I won't count the chickens until they're hatched, I'll let you know if he fulfills his promise to do a perfect job!
>
>
>
> ________________________________
> From: JEFFREY WILLIAMS <livhosaere62@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 10:41 PM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> that's remodeling; you can't have it all.lol
>
>
>
> ________________________________
> From: Cindi Waters <clean_boost@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 12:58 PM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> Yeah. I only wish there was plastic that was soft enough to be easily cut yet stay in place as well. sigh.
>
>
>
> ________________________________
> From: JEFFREY WILLIAMS <livhosaere62@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 12:30 PM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> I believe you can do it to and yes use poster board or those file folders,beer boxes what ever that is stiff enough for you to keep it in place to mark.
>
>
>
> ________________________________
> From: Cindi Waters <clean_boost@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 12:09 PM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> I was thinking to get posterboard for the curves so I could easily bend it. The cardboard is good for the rectangular pieces, yes, you are right. This morning i came to a stalemate with myself and realized I could not go on. So I called someone who said he could do it for $50-100. i thought it was a fair price, but I do believe I can do more of it myself -- now that I have the right cutting tool and the idea of how to do it. The big problem will come in with the curved part, so I think I'll go out and buy some posterboard material, or I even have file folders that might work also to get a template of the curved parts.
>
>
>
> ________________________________
> From: JEFFREY WILLIAMS <livhosaere62@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 11:42 AM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> if you have to you could make cardboard templates of each curve then transfer to the plastic panels then the curves will be right the first time
>
>
>
> ________________________________
> From: Cindi Waters <clean_boost@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 7:59 AM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> the utility knife didn't do the job. The lady at HD told me how to do it, with a special cutter ($4) and HD40, also put masking tape on each side of the cut to make sure I have a straight line. So far, it worked, now all I have to do is the curve part.
>
>
>
> ________________________________
> From: Mike Shoaf <mike.shoaf@...>
> To: "DoIt_Yourself@yahoogroups.com" <DoIt_Yourself@yahoogroups.com>
> Sent: Thursday, November 17, 2011 6:33 AM
> Subject: Re: [DIY] Plastic ceiling panels
>
>
> Â
> how where you cutting the panels? I have seen it done with a $10,000 table saw designed to do just that, but you probably don't have one of those either-lol. you can cut the straight ones using a straight edge and scoring with a razor knife, then breaking at the score line. for the angle cuts, have you tried a rotary cutter such as a dremel?
>
>
> ________________________________
> From: clean_boost <clean_boost@...>
> To: DoIt_Yourself@yahoogroups.com
> Sent: Wednesday, November 16, 2011 11:29 PM
> Subject: [DIY] Plastic ceiling panels
>
>
> Â
> I have old, horrible plastic ceiling panels in the kitchen. They are breaking and so I took them down. I should not have taken them all down, but I did. I erroneously thought they would be easy to replace. I was wrong. I bought the plastic sheeting they make for these things and tried to cut them. They are very hard to cut. they split and break when I cut them. Plus it is very hard to make the right curves on them to fit the panels on the ceiling, not all the panels are angular. Some of the panels have curves, which makes it harder than ever to size and cut. Meantime, I am wondering if there is something else besides this junk sheeting that I can use, short of simply ripping the entire fluorescent light units down off the ceiling which will cost me a fortune to do and then replace the ceiling? This is A W F U L!!! HELP. Please.
>
__._,_.___
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
MARKETPLACE
.
__,_._,___
No comments:
Post a Comment