They shouldn't have any problem with you, so long as you pay them, they'll love you. I had to make my first buy at one point and had no problem.
Avoid premature bids. An initial bid is fine but if someone else is interested you could find yourself in a loosing situation of a bidding war. Thus driving the price up.
Watch the time remaining on the bidding. When it gets down to the last few minutes, wait until the last minute and place a bid that is as high as you would want to pay. If at that point its already higher than you want to pay then its not the right deal. Many people loose a bid because of last second bidding. They think they have it and at the last second someone else gets it. There may be a reserve price too. If that's the case then if it doesn't get to that price, the sale doesn't go through. There is usually no telling if there is a reserve or what that may be. If someone else does bid, let them think they have it. Bid very late and you'll get the best deal for you. There are programs for last second bidding too. You can sleep and let the program bid for you. If someone else is using a program you wouldn't stand a chance of winning that bid.
No problem with the digging. I had the fun of looking and didn't have to pay anything. They do seem to be available but only every now and then. I think if you can find a motor that you're not sure about the gear, the motor and gear assembly should come apart and interchange. You could buy a starter for the motor and use your existing gear assembly. They shouldn't be impossible to disassemble and reassemble.
Good luck and best wishes,
Steve
On 1/18/2012 5:02 PM, resawd wrote:
It looks right to me, right no. of teeth, right mounting. Now if the seller will accept me. I have an account all set up with e-bay and Paypal but I don't have a buying history. I guess that is what they object to. I may place a minimum bid now just to see if its accepted. Thanks for the digging.
--- In DoIt_Yourself@yahoogroups.com, S_Wilson <virtualwilz@...> wrote:
>
> Another one but a bidding situation. Looks good though. States 18 tooth
> count and 110VAC. Don't make any bid until the last seconds or you'll
> just drive the price up, if you bid.
> http://www.ebay.com/itm/Briggs-Stratton-18-Tooth-Snowblower-Starter-/170765561620?pt=LH_DefaultDomain_0&hash=item27c26baf14
> In order to buy on Ebay you have to get an Ebay username and get an
> account with Paypal. Both are easy to setup and are pretty safe. I never
> had any problem except with poorly packaged items by the sellers. A few
> items I bought were broken when I got them.
>
> Steve
>
> On 1/14/2012 6:33 AM, S_Wilson wrote:
> >
> > I didn't even notice the AC plug on it. I just noticed I hadn't seen
> > it before. I'm starting to recognize that starter easily now, its
> > definitely unique.
> > The more I look at the 12VDC motors on most of the Briggs & Stratton
> > starters, it looks like they use the same Bosch motor with a different
> > housing for the different applications. I even found a Bosch motor
> > brochure that showed all the different applications for the one motor.
> > It appears the motor end on the application side is interchangeable to
> > the 2 screws holding the assembly together. I didn't see the motor
> > end for the design resawd is looking for in the brochure for but the
> > motor looks the same. Bosch used a female slot in the motor shaft end.
> > The mating slot on application end was a male. It looks like they just
> > key together. I could be wrong but thats what it looks like.
> > I haven't been able to find any similar Bosch AC motor. I would assume
> > Bosch made it but there aren't any references to it anywhere.
> > Hoping this is a good seller, the price is good if it works.
> >
> > Steve
> >
> > On 1/14/2012 3:51 AM, wired wrote:
> >
> >> Funny how some sellers on EBAY give few details about such a rare
> >> item. He doesn't even say the voltage although it does look like a
> >> 120 volt plug on it. Good luck.
> >>
> >> --- In DoIt_Yourself@yahoogroups.com
> >> <mailto:DoIt_Yourself%40yahoogroups.com>, S_Wilson <virtualwilz@>
> >> wrote:
> >> >
> >> > Appears a new Briggs starter came up on Ebay. Different seller and the
> >> > price is good.
> >> >
> >> http://www.ebay.com/itm/Starter-Briggs-and-Stratton-Engine-390551-/120842679741?pt=LH_DefaultDomain_0&hash=item1c22c8f5bd
> >> <http://www.ebay.com/itm/Starter-Briggs-and-Stratton-Engine-390551-/120842679741?pt=LH_DefaultDomain_0&hash=item1c22c8f5bd>
> >> >
> >> > Steve
> >> >
> >> >
> >> > On 1/6/2012 4:40 PM, S_Wilson wrote:
> >> > >
> >> > > Off and on I keep looking for the Briggs 110V starter. I found a
> >> parts
> >> > > diagram for that starter. It shows it as discontinued but gives part
> >> > > numbers for the components on it. It appears there was a 12V
> >> motor and
> >> > > a 110V motor. Its still possible to find someone that has one on
> >> their
> >> > > shelf, somewhere. The trick is knowing what you're looking for.
> >> There
> >> > > are several links here that say to call on the motors. Might be
> >> > > something there. (Google search for "Briggs 393842 aftermarket".
> >> > >
> >> http://www.partstree.com/parts/?lc=briggs_and_stratton&mn=132232-0369-01&dn=89950006
> >> <http://www.partstree.com/parts/?lc=briggs_and_stratton&mn=132232-0369-01&dn=89950006>
> >> > >
> >> http://www.superxpower.com/pages/OemParts#%2fBriggs_%26_Stratton%2f130292-1862-02%2fElectric_Starter%2f130292186202%2f8090009A
> >> > >
> >> http://www.smallenginepowersports.com/pages/oemparts?aribrand=AYP#%2fBriggs_%26_Stratton%2f130207-0493-99%2fElectric_Starter%2f130207049399%2f5530007A
> >> > >
> >> http://www.millersturfntrail.com/pages/OemParts#%2fBriggs_%26_Stratton%2f130232-0439-99%2fElectric_Starter%2f130232043999%2f5530007A
> >> > >
> >> http://www.bluemoonparts.com/pages/OemParts#%2fBriggs_%26_Stratton%2f130202-1880-01%2fElectric_Starter%2f130202188001%2f8090009A
> >> > >
> >> > > This is the 12V version:
> >> > >
> >> http://www.ebay.com/itm/BRIGGS-STARTER-PART-390551-/270869975026?pt=LH_DefaultDomain_0&hash=item3f111bcff2
> >> <http://www.ebay.com/itm/BRIGGS-STARTER-PART-390551-/270869975026?pt=LH_DefaultDomain_0&hash=item3f111bcff2>
> >> > >
> >> > > Best of luck,
> >> > > Steve
> >> > >
> >> > > On 1/2/2012 5:33 PM, resawd wrote:
> >> > >
> >> > >> By all means, give me the contact info. I'm trying all suggestions.
> >> > >>
> >> > >> --- In DoIt_Yourself@yahoogroups.com
> >> <mailto:DoIt_Yourself%40yahoogroups.com>
> >> > >> <mailto:DoIt_Yourself%40yahoogroups.com>, betsy king <kingbetsi@>
> >> > >> wrote:
> >> > >> >
> >> > >> > Hi. I'm not sure I've read enough posts to know if I can help but
> >> > >> there is a local guy here that rebuilds starters of all kinds and
> >> > >> armatures. His name is Dan and he's good. If you're interested I
> >> have
> >> > >> his number. Let me know. It might be worth a phone call to see
> >> if he
> >> > >> might help.
> >> > >> >
> >> > >>
> >> > >
> >> > >
> >> >
> >>
> >
> >
>
No comments:
Post a Comment