myself I'm partial to Milwaukee as I have had only two 4 1/2 inch angle grinders in 25 years of excavation and fabrication and both of them were put through hell and back and the second is still going strong.I have just bought a makita and cannot offer any testament to it's quality since I have only used it once for cutting tile with a diamond blade worked fine..hope this helps jeff
From: Paul <przxto99@yahoo.com>
To: DoIt_Yourself@yahoogroups.com
Sent: Wednesday, November 16, 2011 2:09 PM
Subject: [DIY] Angle Grinder Suggestions
Hi,
I would like to buy a 4-1/2" angle grinder and would appreciate input from any owners with comments pro and con.
I'm looking at Dewalt, Milwaukee, and Makita. There are many reviews on the internet but after reading them I am still not able to decide on one particular model.
Will be using this to remove rust, sharpen drill bits, cut off too long bolts,and possibly also for chipping away at cinder block from time to time.
I'm hoping to find a grinder that can do all of the above, and not fail in the first 30 days, and will spend up to 150.00
Thanks for any suggestions
Paul
I would like to buy a 4-1/2" angle grinder and would appreciate input from any owners with comments pro and con.
I'm looking at Dewalt, Milwaukee, and Makita. There are many reviews on the internet but after reading them I am still not able to decide on one particular model.
Will be using this to remove rust, sharpen drill bits, cut off too long bolts,and possibly also for chipping away at cinder block from time to time.
I'm hoping to find a grinder that can do all of the above, and not fail in the first 30 days, and will spend up to 150.00
Thanks for any suggestions
Paul
__._,_.___
Please send decorating questions to Interior Motives List - to subscribe send an email to: Interior_Motives-subscribe@yahoogroups.com
MARKETPLACE
.
__,_._,___
No comments:
Post a Comment