I took it to mean install the 2x4 block inside the wall behind the tub, assuming the normal access panel exists behind the plumbing or some other way to finagle the 2x4 in there.
Bob
From: DoIt_Yourself@yahoogroups.com [mailto:DoIt_Yourself@yahoogroups.com] On Behalf Of mountain953346
Sent: Friday, June 21, 2013 6:38 AM
To: DoIt_Yourself@yahoogroups.com
Subject: [DIY] Re: installing three piece shower faucet in mobile home
Perhaps something a little nicer than a 2x4 block in your
shower...nice thing to look at while you shower, eh!!~
I found a small nice white plastic conical structure, looks like a
small pedastal, in the thrift store off of an old light
fixture..drilled two 3/16 and one 1/4" hole, two to mount to the wall
and one for the shower fixture pipe (a nice shiny finished pipe strap)
Total cost about $3 and the final product looks like it was
made for the shower..all matching white and stainless strap..
Just my $1.02
Rich
--- In DoIt_Yourself@yahoogroups.com, "Nina Finelli" <nina.finelli@...> wrote:
>
> Install a piece of 2 by 4 blocking behind it and strap it to the blocking
>
> Sent from my Droid Charge on Verizon 4G LTE
>
> ------Original Message------
> From: RhondaT <rtomazon@...>
> To: <DoIt_Yourself@yahoogroups.com>
> Date: Thursday, June 20, 2013 8:22:59 PM GMT-0000
> Subject: [DIY] installing three piece shower faucet in mobile home
>
> I am changing the cheap hard ware in my shower with a delta how do I brace the spout that goes to the tub so that when you pull up to turn on the shower it is sturdy thanks for any info you can give!!!
>
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (4) |
No comments:
Post a Comment